Timber Connectors – Secure Joining of Wooden Structures

Connector types by joint position

Face-mounted connectors join beams along their axis and are essential for extending load-bearing members. Angle brackets enable perpendicular connections at 90 degrees, ideal for rafters and staircases. Side-mounted joints secure parallel beams and increase overall structural stability.

Material and corrosion protection

Quality connectors must be made from steel at least 2mm thick with galvanization or epoxy coating. Brands like WOMAX and Total tools offer hot-dip galvanized brackets with ZN275 protection that guarantees durability even in outdoor conditions. Poorly protected hardware loses load capacity after just a few years of moisture exposure.

Dimensions and selection by beam cross-section

Connector widths range from 60mm to 120mm and must match the thickness of the beam you're joining. Standard 8x12cm beams work fine with 80mm wide brackets, while beams over 12x16cm require more robust profiles. Always check the number and diameter of mounting holes – cheaper connectors often have insufficient attachment points.

Proper installation and screw selection

Never use ordinary wood screws – connectors require specialized structural screws with full threading or ribbed shank that prevent withdrawal. Brands such as DOMAX and Gamet offer complete sets with appropriate fasteners included. Pre-drilling holes is mandatory to avoid splitting the wood.

Structural requirements and certification

For load-bearing structures, use only connectors with CE marking and declared capacity in kilonewtons (kN). Manufacturers like DMX SYSTEM and G. Alberts provide technical datasheets with exact values for allowable shear and tension forces. Improvising or using brackets of unknown origin can compromise roof stability.

Selection and Pricing

We offer 463 products from 14 brands across 4 sellers. Prices range from 11 to 12,819 RSD. Currently 57 products are on sale with an average discount of 40%.